Standard small parameters, power and motor specifications listed below. These parameters are only a guideline to system design and predicted response. Some of the parameters such as the Qts will shift with heat or excursion by more than 20%.

LMS-R

  • Thiele/Small Parameters

  • top

Parameter 12" LMS-R 15" LMS-R Description
Qts 0 0 Total Q
Qes 0 0 Electrical Q
Qms 0 0 Mechanical Q
Fs 00 Hertz, Free Air Resonance
Res 0 0 Ohms, DC resistance
Ls 0 0 H, series inductance
Lp 0 0 H, lossy series inductance
Rp 0 0 Ohms, loss across Lp
Dia 0 0 m meters, effective
Vas 0 0 liters, air volume equivalent
mms 0 0 grams, effective mass
cms 0 0 um/N, compliance
bl 0 0 T*m, motor strength
SplSens 0 0 dBSPL max @1W absorbed
Measured with Praxis (voice coil wired in parallel)

  • Power and Displacement

  • top

Parameter 12" LMS-R 15" LMS-R Description
Geometric Stroke 00Millimeters, (voice coil - gap) / 2
70% BL 00Millimeters, BL is 0.7 original value (one way)
Xmech 00Mechanical displacement limit (one way)
Long Term Power 00Watts, 2 hour RMS limit
Program Power 00Peak power limit & recommended RMS

  • Motor & Coil

  • top

Paramete r12" LMS-R15" LMS-RDescription
Nominal Impedance 00 Ohms, Approximate nominal load
Gap height 00 inches, millimeters
Coil height 00 inches, millimeters
Coil Layers 00 8 Layer flat wound
Coil size 00 Inches, former inside dimension
Maximum gap flux 00 tesla
Force factor 00 Newtons2/watt

Mounting/Installation Dimensions (PDF)

Copyright 2010 TC Sounds Inc.